mobile fall alert system with SOS button and two way communication

Mobile emergency calls with fall detection, exact location, SOS button and phone function
The GPS fall alert is very easy to use - it can be used anywhere and has a long battery life.
It is small and portable and features an attractive design and a very pleasant soft surface.

• Small, handy, and solid with long battery life
• Fall alert for children and the elderly
• Voice Monitoring
• Two-way voice communication
• SOS Emergency Button
• Locates using GPS satellites
• GSM positioning when GPS satellite signal is not accessible (for example, on the subway, in a basement...)
• Supports A-GPS for quicker locating
• Responds with map link of the current position
• Rechargeable 900mAh lithium battery. Standby time: 30 days
• Inbuilt 3D G-sensor for movement, impact warning and power management
• 8 MB flash memory
• Stores data of up to 60 000 positions
• Micro-USB charger and cable

The fall alert system contains a 3D motion sensor that measures movements in all directions. Once the device detects a fall it sends a text message to up to three phone numbers with the notification that there has been an emergency and automatically dials the first saved number. If this call is not answered, it will automatically select the next number and so on. If nobody picks up, the detector repeats the process 5 minutes later until someone answers or the SOS button is pressed..

Once someone picks up at one of the phone numbers, you can speak normally over the fall alert system, as over a regular mobile phone.

The device detects a fall based on multiple criteria. It registers an impact using the dip angle after it has been in that position for 10 seconds..

If the large alarm button is pressed down for 3 seconds, the device sends an SMS to all authorized phone numbers and starts to dial them one by one. If nobody picks up at the first telephone number, the next number is dialed automatically. If none of the saved telephone numbers can be reached, it starts redialing in five minutes until someone finally answers or the alarm button is pressed again.

To make a normal phone call, all you have to do is press the call button and hold it down for 3 seconds. Then there is an acoustic signal, the green LED on the device starts flashing quickly and the first phone number is dialed. To end the call, simply press the emergency call button.

Sometimes it is not clear where you are exactly, like if you are taking a walk in the woods.
In this case, each of the authorized phone numbers can request the exact location from the fall detector.
The device then sends a text message with your exact coordinates and a link. Clicking the link will show your exact location on Google Maps.

The fall alert is charged using a USB cable and power supply unit that are delivered with it.
The device operates in various modes.
In standard mode all the functions of the device are available at all times and it needs to be recharged every 3 to 7 days depending on frequency of use
This is the default mode.
The battery can last up to 20 days in power-saving mode. The unit is only active when it detects movement and can remain active for a specific time. Outside this time frame it cannot receive phone calls or requests for position finding.